Finding your suitable readers for alphacool ram cooling is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for alphacool ram cooling including detail information and customer reviews. Let’s find out which is your favorite one.
932 reviews analysed
1. Alphacool 17427 GPU RAM Copper Heatsinks 14x14mm – 10pcs Air Cooling Passive Coolers
The small heat sinks are the perfect addition for cooling various electronic components such as the graphics card VRam, the voltage transformer on a motherboard, or even in a power amplifier or in RC vehicles. To ensure maximum heat capacity and cooling performance, the coolers are made of copper. Alphacool uses a special coating to prevent the infamous greenish discolouration on copper as much as possible. This increases the lifespan of the cooler and ensures steady cooling performance. The coolers can be installed onto the desired components with optional thermal paste or self-adhesive thermal pads. Technical Data Dimensions: 14 x 14mm Material: Fullcopper Scope of Delivery Alphacool GPU RAM Copper Heatsinks 14x14mm – 10pcs
2. Alphacool 11435 Eisblock HDX-3 PCI-e 3.0 x4 Adaptor for M.2 NGFF with Water Cooling Block – Black Water Cooling HDD/RAM Cooler
The Alphacool Eisblock HDX-3 water block offers the best cooling for your M.2 SSD. The included PCIe card, on which the water block is mounted, also provides your SSD with an outstanding bandwidth of up to 3900 MB/s. Continuous data transfer dramatically lowers the performance of an M.2 SSD without cooling and can actually drop performance down to as little as 10% of its actual capability. Transferring large amounts of data heats up the memory controller and chips until a safety mechanism kicks in and severely throttles the SSD’s performance. This can be countered by cooling the SSD. After developing the HDX M.2 water block for motherboards with M.2 slots and the passively-cooled HDX-2 PCIe cooling block, Alphacool has gone a step further with the Eisblock HDX-3 to offer a water cooling solution to this problem. The M.2 SSD is screwed onto a PCIe card and then mounted onto the water block. The water block itself is made of nickel-plated copper with a screwed-on acetal lid. Water in the block ensures optimal heat transfer away from the M.2 SSD. With G1/4” connectors, the water block can be attached to any standard water cooling loop. The PCIe card is plugged into a 4xPCIe slot and screwed onto the case. With it, data can be transferred at speeds of up to 3900 MB/s. That’s a 600% improvement over conventional 2.5” SATA-SSDs, since the maximum bandwidth for those is 640 MB/s. Even compared to motherboard slots, the plug-in card combined with the water block still offers substantially higher transfer rates. M.2 SSDs on motherboards are often only plugged into a 2xPCIe slot, which halves the maximum data transfer rate. It is also difficult to properly cool an M.2 SSD on a motherboard, since the graphics card is generally mounted directly above or below it and tends to significantly heat up the surrounding area. With the Alphacool Eisblock HDX-3, you can avoid all these problems and get the best performance from your M.2 SSD.
3. uxcell 8 Pcs Copper Memory IC Chipset Cooling Heatsink 22mm x 8mm x 5mm for DDR RAM VGA
- Compatible with all standards SD/DDR SDRAM.
- fits for all Motherboards.
4. Alphacool 17426 GPU RAM Copper Heatsinks 10x10mm – 10pcs Air Cooling Passive Coolers
The small heat sinks are the perfect addition for cooling various electronic components such as the graphics card VRam, the voltage transformer on a motherboard, or even in a power amplifier or in RC vehicles. To ensure maximum heat capacity and cooling performance, the coolers are made of copper. Alphacool uses a special coating to prevent the infamous greenish discolouration on copper as much as possible. This increases the lifespan of the cooler and ensures steady cooling performance. The coolers can be installed onto the desired components with optional thermal paste or self-adhesive thermal pads. Technical Data Dimensions: 10 x 10mm Material: Fullcopper Scope of Delivery Alphacool GPU RAM Copper Heatsinks 10x10mm – 10pcs
5. AMD Ryzen 9 3900X 12-core, 24-Thread Unlocked Desktop Processor with Wraith Prism LED Cooler
- The world’s most advanced processor in the desktop PC gaming segment
- Can deliver ultra fast 100+ FPS performance in the world’s most popular games
- 12 Cores and 24 processing threads, bundled with the AMD Wraith Prism cooler with color controlled LED support
- 4.6 GHz Max Boost, unlocked for overclocking, 70 MB of game Cache, ddr 3200 support
- For the advanced socket AM4 platform, can support PCIe 4.0 on x570 motherboards
AMD Ryzen 9 3900X 12 core, 24 thread unlocked desktop processor with Wraith Prism LED cooler
6. NZXT Kraken Z73 360mm – RL-KRZ73-01 – AIO RGB CPU Liquid Cooler – Customizable LCD Display – Improved Pump – Powered by CAM V4 – RGB Connector – AER P 120mm Radiator Fans (3 Included)
- Customize Your Battlestation: With a bright, 2.36” LCD screen capable of displaying 24-bit color, you can now completely customize the look of your CPU cooler
- Stay In Control: CAM’s elegant, user-friendly software makes you the master of your PC with simple-to-use, intuitive controls, you can manage your Kraken’s performance and appearance with ease
- Incredible Performance: Featuring a chamfered intake and fluid dynamic bearings, they deliver silent operation, long-term reliability, and powerful cooling performance
- Simple Installation: With the fully programmable display, the pump can be rotated to fit the needs of your motherboard without affecting the direction of the logo or image
- Compatible Socket & CPU: Intel Socket LGA 1151, 1150, 1155, 1156, 1366, 2011, 2011-3, 2066 / AMD Socket AM4, TR4(bracket not included)
The all-new Kraken Z Series lets you personalize your all-in-one liquid cooler like never before. Through CAM’s unique software interface, you can do more than simply fine-tune settings; you can now display your favorite images and animated gifs, or CAM system information, allowing for total customization. Backed by a 6-year, the Kraken Z Series provides superior performance in liquid cooling, simple installation, and a look that is uniquely your own.
7. Senmod 10pcs 28 x 28 x 20mm Aluminum Heatsink Cooler Circuit Board Cooling Fin for Raspberry Pi, VGA RAM, IC Chips, Mosfet SCR, South Bridge, North Bridge
- Can be applied with other devices for cooling VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge, Northbridge etc.
- Improve the environment (temperature around the device, as well as the flow rate of the air), reduces the power loss and extend the service life for your electronic devices.
- Made of high quality Aluminum, good thermal conductivity.
- Overall Size: 28 x 28 x 20mm/ 1.1″ x 1.1″ x 0.8″(L*W*H)
- Please make sure that the size of the heat sink fits that of your component.
Compatible with Raspberry Pi 2, Raspberry Pi B/B+, Raspberry Pi A/A+, South Bridge, North Bridge, VGA RAM, MOSFET, DC Boost Power Converter, Power Converter, LED Light etc.
Product name: Aluminum Heat Sink
Material: Aluminum; Color: Black
Size: 28 x 28 x 20mm/ 1.1″ x 1.1″ x 0.8″(L*W*H)
It can cool down the board and make your electronic equipment operate safely.
Reduce the risk of hardware failure because of overheating.
1.Please check the specification table and make sure that the size of the heatsink fits that of your component.
2. Please allow 1-3mm error due to manual measurement.
3. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
10pcs Anodized Aluminum Heat Sink
8. Enokay 8 Pieces 14mm×12mm×5.5mm Cooling Copper Heatsink for Raspberry Pi VGA RAM Cooling Heatsinks Cooler
- Pre-applied thermal conductive adhesive material
- simple installation
- Works on the SMCI USB/NIC controller chip. -Offer significant cooling advantage than with the heat sinks
- This Copper made VGA Ram heatsinks can reduce the VGA memory or chips temperature, which prevent system failure.
- Package included: 8 pcs copper heatsinks
- Product size:14*12*5.5mm
Package included: 8 pcs copper heatsinks
Heatsink has been labeled as special cooling paste, need to tear off pieces of paper, convenient installation.
Raspberry Pi NOT included
9. Easycargo 100pcs Heatsink Kit Small Cooler Heat Sink Set for Cooling Development Board Laptop CPU GPU VGA RAM VRAM VRM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator
- Update Version: 100pcs (18+82) small to medium sizes of heat sink.
- Small anodized Aluminium: 20pcs 9x9x5mm, 8pcs 10x10x10mm, 8pcs 11x11x5mm (L*W*H)
- Medium anodized Aluminium: 8pcs 14x14x7mm, 8pcs 19x19x5mm, 8pcs 20x20x6mm, 2pcs 22x22x10mm (L*W*H)
- Silver Tone Aluminium: 20pcs 7x7x6mm, 10pcs 8.5×8.5x8mm, 8pcs 15x15x6.5mm (L*W*H)
This set of cooler heat sink includes 10 different small to medium range sizes of heatsinks. It is totally composed of 100pcs of heatsinks including: Small anodized Aluminium: 20pcs 9mmx9mmx5mm, 8pcs 10mmx10mmx10mm, 8pcs 11mmx11mmx5mm; Medium anodized Aluminium: 8pcs 14mmx14mmx7mm, 8pcs 19mmx19mmx5mm, 8pcs 20mmx20mmx6mm, 2pcs 22mmx22mmx10mm, Silver Tone Aluminium: 20pcs 7mmx7mmx6mm, 10pcs 8.5mmx8.5mmx8mm, 8pcs 15mmx15mmx6.5mm (L*W*H). Can be used for cooling of variety of electrical components such as Development Boards VRAM VRM CPU GPU VGA RAM IC Chips LED Laptop MOSFET Transistor SCR Southbridge Northbridge Voltage Regulators.
10. Corsair iCUE H100i RGB Pro XT, 240mm Radiator, Dual 120mm PWM Fans, Software Control, Liquid CPU Cooler
- Two 120 millimeter corsair ML series magnetic Levitation PWM fans deliver improved airflow for extreme CPU cooling performance
- 16 individually addressable RGB LEDs light up the pump head to produce stunning customizable lighting effects to match your build
- Experience incredible cooling performance with each fan running from 400 to 2 400 RPM while in operation
- Zero RPM cooling profiles In corsair iCUE software allow fans to stop entirely at low temperatures eliminating fan noise
- Corsair iCUE software allows you to control and synchronize your cooler’s RGB lighting with all iCUE compatible devices monitor CPU and coolant temperatures and adjust fan and pump speeds All from a single intuitive interface
The CORSAIR iCUE H100i RGB PRO XT is an all-in-one liquid CPU cooler built for both low noise operation and extreme CPU cooling with a 240mm radiator and two CORSAIR ML120 PWM fans controllable between 400 RPM and 2 400 RPM Equipped with 16 individually addressable RGB LEDs on the pump head the H100i RGB PRO XT is customizable through CORSAIR iCUE software letting you create vivid lighting effects adjust fan speeds and enable Zero RPM mode to keep the noise down at low temperatures With a thermally optimized cold plate and low-noise pump design along with easy installation on most major CPU sockets the H100i RGB PRO XT pairs killer looks with chiller performance. Fan Airflow : 75 CFM
By our suggestions above, we hope that you can found Alphacool Ram Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!