Top 9 Cooling Fan Shutter

0

Nowadays, there are so many products of cooling fan shutter in the market and you are wondering to choose a best one.You have searched for cooling fan shutter in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings cooling fan shutter which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

667 reviews analysed

1. Iliving 12 Inch Variable Speed Shutter Exhaust Fan, Wall-Mounted, 12"

Iliving 12 Inch Variable Speed Shutter Exhaust Fan, Wall-Mounted, 12"

Feature

Description

Size:12″ |  Style Name:Variable Speed Shutter

The iLIVING shutter exhaust fan is perfect for removing excess heat, moisture, and unpleasant odors from virtually any commercial location, including restaurants, factories, warehouses, barns, and greenhouses. This fan features aluminum blades, OSHA compliant wire guards, and automatic shutters that open and close in tandem with the operation of the fan. The completely enclosed motor is thermally protected and permanently lubricated. The fan comes fully assembled out of the box; only installation required is the electrical hardwire. The shutter fan comes in 8 different sizes: 10 inch, 12 inch, 16 inch, 18 inch, 20 inch, 24 inch, 30 inch, and 36 inch; the 18 inch shutter fan has both a variable Speed ILG8SF24V and a single Speed model. The iLIVING 30 inch and 36 inch shutter fans are only available in single Speed. For variable Speed models, the iLIVING ILG8SFSC Speed controller is sold separately.

2. Iliving 18 Inch Variable Speed Shutter Exhaust Fan, Wall-Mounted, 18"

Iliving 18 Inch Variable Speed Shutter Exhaust Fan, Wall-Mounted, 18"

Feature

Description

Size:18″ |  Style Name:Variable Speed Shutter

The iLIVING shutter exhaust fan is perfect for removing excess heat, moisture, and unpleasant odors from virtually any commercial location, including restaurants, factories, warehouses, barns, and greenhouses. This fan features aluminum blades, OSHA compliant wire guards, and automatic shutters that open and close in tandem with the operation of the fan. The completely enclosed motor is thermally protected and permanently lubricated. The fan comes fully assembled out of the box; only installation required is the electrical hardwire. The shutter fan comes in 8 different sizes: 10 inch, 12 inch, 16 inch, 18 inch, 20 inch, 24 inch, 30 inch, and 36 inch; the 18 inch shutter fan has both a variable Speed ILG8SF24V and a single Speed model. The iLIVING 30 inch and 36 inch shutter fans are only available in single Speed. For variable Speed models, the iLIVING ILG8SFSC Speed controller is sold separately.

3. AC Infinity AIRLIFT T10, Shutter Exhaust Fan 10-inch with Temperature Humidity Controller – Wall Mount Ventilation and Cooling for Sheds, Attics, Workshops

AC Infinity AIRLIFT T10, Shutter Exhaust Fan 10-inch with Temperature Humidity Controller - Wall Mount Ventilation and Cooling for Sheds, Attics, Workshops

Feature

4. SAILFLO Exhaust Shutter Fan 8 Inch 300 CFM, 2 Directions Reversible Blower, Strong Airflow Ventilation for Bathroom Attic Kitchen Window Basement, 8" Diameter Propeller-12"×12"Panel

SAILFLO Exhaust Shutter Fan 8 Inch 300 CFM, 2 Directions Reversible Blower, Strong Airflow Ventilation for Bathroom Attic Kitchen Window Basement, 8" Diameter Propeller-12"×12"Panel

Feature

5. VES 24" Exhaust Shutter Fan, Wall Mount, 3 Speed

VES 24" Exhaust Shutter Fan, Wall Mount, 3 Speed

Feature

Description

Size:24″

These SF shutter exhaust fans have a totally enclosed motor and comes complete with built in speed switches and a 9′ cord. no electrician is required, just mount the fan in the wall and plug it into an approved receptacle. the corrosion resistant aluminum shutter comes complete with a tie bar to reduce shutter flapping and keep the shutters closed when the fan is not running. on the intake side of the fan the balanced aluminum blade is protected by a strong painted grill.

Features:
built in speed switch with 9′ cord attached
comes totally assembled out of the box
totally enclosed maintenance free motor
corrosion resistant aluminum shutter with tie bar to reduce shutter flapping and opening on windy days
safety painted grill on intake side meets osha standards

Motor features:
csa/csa-us approved
50/60 hz
f class insulated
follow nema standards either 48 or 56 frame
dupont nomex insulation
rotors have been balanced to reduce noise vibration and prolong life
motor enclosures have been machined to <0.5mm to reduce rotor shaft play
csa/csa-us for an ambient temperature of 40°c but will stand up to 65°c (149°f)
copper windings rated at h class
bearing specifications – 40°c to 140v c
capacitor rating 450vac, 10,000 hours for extended life
silicon steel rotors and stators

Applications:
designed for agricultural, horticultural,factories, warehouses, garages, attics and restaurants
remove and control unwanted condensation
exhaust obnoxious fumes
exhaust excessive heat
improve inside air quality

6. iPower 12 Inch Shutter Exhaust Fan Aluminum,High Speed, Silver

iPower 12 Inch Shutter Exhaust Fan Aluminum,High Speed, Silver

Feature

7. VES Exhaust Fan, Shutter Fan, Box Fan, with 9 Foot Cord 3 Speed for Indoor or Outdoor Ventilation (20 Inches)

VES Exhaust Fan, Shutter Fan, Box Fan, with 9 Foot Cord 3 Speed for Indoor or Outdoor Ventilation (20 Inches)

Feature

Description

Size Name:20 Inch

PRODUCT FEATURES
– Totally assembled
– No electrician required when plugged into an approved electrical outlet
– Safety powder-coated guard on intake side meets OSHA standards
– 3 wing aluminum balanced blade
– 2 year warranty on Motor and 1 year limited warranty on all other parts
– Motor seal, switch and wiring connections have moisture resistant rubber gasket

MOTOR FEATURES
– Motor is CSA/CSA-US approved
– Direct Drive
– 50/60 hz
– HP: 1/10
– SPD:3
– RPM (H/M/L): 1650/1565/1454
– Voltage: 115
– Rotors have been balanced to reduce noise vibration and prolong life
– Motor enclosures have been machined to <0.5mm to="" reduce="" rotor="" shaft="" play="">
– Copper winding
– Bearing specifications -40˚C to 140˚C
– Capacitor rating 450vac, 10,000 hours for extended life
– Silicon steel rotors and stators

Picking the correct fan
Choosing the correct fan depends on the volume of the area as well as the air exchange rate. To pick the correct fan, insert the values into the following equation to find the CFM. Then, review the chart in the listing’s images to find which fan is closest and/or contains the CFM.
Equation: (Volume x air exchange rate) / 60 = CFM.

For example: I am using my garage for repairs and need to select a ventilation fan to expel fumes. The volume of the garage is 5,760 cubic feet (24′ x 24′ x 10′). I want an air exchange rate of 25 (the air inside the garage is completely changed 25 times in an hour, which is about every 2.5 minutes). 5,760 x 25 = 144,000. 144,000 / 60 = 2,440 CFM. Reviewing the chart in the images, 2,440 fits in the 0.1 SP (static pressure) column for the 20″ shutter fan. This means I need a 20″ shutter fan to ventilate my garage.

8. (Pack of 2) 12" Electric Radiator Cooling Fan Push Pull Electric Slim Fan 12V 80W 1550 CFM with Mounting Kit Red(Diameter 12" Depth 2.56")

(Pack of 2) 12" Electric Radiator Cooling Fan Push Pull Electric Slim Fan 12V 80W 1550 CFM with Mounting Kit Red(Diameter 12" Depth 2.56")

Feature

9. KEN BROWN 12 Inch Variable Shutter Exhaust Fan Wall Mounted With Speed Controller 1800CFM For Garages And Shops,Greenhouse,Attic Ventilation

KEN BROWN 12 Inch Variable Shutter Exhaust Fan Wall Mounted With Speed Controller 1800CFM For Garages And Shops,Greenhouse,Attic Ventilation

Feature

Description

Size:12 Inch Variable

KEN BROWN manufactures high quality air delivery and air movement products for the residential, commercial, industrial, and agricultural markets.All KEN BROWN Fan Products has 5 Years Motor Warranty- ETL Listed.

Features:

Rust proof 3 aluminium blades improve air velocity.

Automatic Shutters that open and close in tandem with the operation of the fan.

Fully enclosed motor is thermally protected and permanently lubricated for easy maintenance.

Included Speed Controller,range from 70% to 100% without creating background noise or hum at low speeds.

Specification:

Rotating Speed:1650 RPM

Air volume:1800 CFM

Wind Speed: 10.5M/S

Watts : 63W

Voltage: 120V/60Hz

How to connect the speed controller to the exhaust fan?

Firstly,the black wire of the fan is connected to the white wire of the speed controller.

Secondly,the black wire of the speed controller is connected to switch ,the White wire of the fan is connected to Neutral and green wire to ground.

Installation method and connection diagram are come with clear directions on the user manual. It is very easy to connect with the speed controller and install on the wall.

How to use the speed controller?

Start by turning the knob to High and gradually decrease the power to you desired power level.When finished,turn knob back to OFF.

Notice:

If the speed controller is not connected, the exhaust fan will run at maximum speed.

KEN BROWN has dedicated Engineering and Quality-Assurance teams to ensure our products meet strict quality standards such as UL, ETL, SAA, CE, CSA, and NOM.

Customer satisfaction is our great pursuit, any problems with our products, please be free to contact us, Ken Brown Customer Service Team is willing to help solve it.

Conclusion

By our suggestions above, we hope that you can found Cooling Fan Shutter for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general