The Best Disc For Dash Mount
910 reviews analysed
1. Dashboard Pad Mounting Disk for Suction Cup Phone Mount & for Tom Tom Garmin GPS Suction Mount Sat Nav Dash Cam Holder Stick On Universal Dash Mount Pad w/3M Adhesive 70mm Diameter 3 Pcs
- To provide smooth, glass-like surfaces for pedestals of suction cup car mounts to work more effectively.
- 3M PE foam adhesive at the bottom can be fixed on textured surfaces.
- Has a diameter of around 2.76 inches, applicable to most suction cup GPS/mobile holders on the market.
- No tools required for installation.
- Buy with confidence as every APPS2Car product comes with one-year warranty.
2. Arkon 90mm Adhesive Mounting Disk for Car Dashboards Garmin TomTom GPS Dashboard Disc
The AP020 90mm adhesive mounting disk allows you to mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard, including mounting pedestals for Garmin and TomTom GPS devices. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the adhesive to cure before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For an 80mm disk to use with 70mm suction mounts, see Arkon Model AP013. For a 70mm disk to use with 60mm suction mounts, see Arkon Model AP036.
3. Crossery Adhesive Mounting Disk for Car Dash Board | Phone Mount, Dashboard Cam & Smartphone Holder Suction Disc | Compatible with Garmin & Tom Tom GPS | Cell Phone & Car Accessories | 70mm 2-Pack
- ? UNIVERSAL – This semi-permanent adhesive mounting disk works with any 60mm suction mounting pedestal, including Garmin and TomTom GPS, for adhering to any vehicle dashboard.
- ? PEEL & STICK – Installation on your dashboard can be done in 3 steps: Clean the surface of your selected area, remove the paper backing from the mount disk, then position the disk and press it down.
- ? EASY REMOVAL – Apply a generous amount of rubbing alcohol or a similar adhesive removal product to the area with a cotton swab. Cut through with a long piece of dental floss until the disk is removed.
- ? LEAVES NO DAMAGE – This mounting disk won’t leave a trace when you decide to remove it. While the adhesive is strong, the disk can be lifted effortlessly without leaving any residue.
- ? DURABLE & VERSATILE – Our disk is made of high quality heat-resistant material that is sure to last a long time. The adhesive can also stick to vertical surfaces, soft touch dashboards and windshields.
Worried that your suction cup mount will damage your dashboard?
Mounting your GPS, cell phones and other devices on the car dashboard or windshield is essential while driving. It allows you to conveniently view your messages without taking your eyes off the road.
However, the mounting pedestals and suction holders of these electronics can be sticky. When placed on textured or soft dashboards, they can damage the surface. Plus, they leave a residue once you decide to remove them.
Protect your dash from adhesive remnants with Crossery Adhesive Mounting Disk!
This car accessory fits any 60mm suction mount for smartphones, car cameras and GPS. The disk adheres to the dashboard, while the suction cup holds on to the disk. With a much larger size than the cup, it ensures a secure attachment so that the pedestal won’t fall off.
The strong adhesive ensures that your device won’t drop even if it is placed on your windshield. It will not melt or lose its strength under the heat of the sun.
Don’t worry about upgrading your devices in the future, when you would need a larger disk. We used a semi-permanent adhesive that can be detached as easily as it is set up.
Here are more benefits of using our mounting disk:
? Also comes in larger sizes of 80mm and 90mm to suit your needs ? The disk is compact and won’t take up too much space on your dashboard
? A practical gift for friends and family on any occasion ? Backed with a 2-year warranty
Mount your devices on the dashboard safe and secure. Add Crossery Adhesive Mounting Disk to your cart TODAY!
4. Arkon 80mm Adhesive Mounting Disk for Car Dashboards GPS Smartphone Dashboard Disc
The AP013 80mm adhesive mounting disk allows you to mount an Arkon or third-party 70mm windshield suction mounting pedestal to your car’s dashboard, including Arkon’s mounting pedestal models GN079WD-SBH, GN068WD-SBH, GN022-SBH, GN014-SBH, GN015-SBH, and GN042-SBH. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the disk adhesive to cure on the dashboard before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For a 90mm disk to use with 80mm suction mounts, see Arkon Model AP020.
5. Dashboard Mount Disc 70mm Diameter 3M Adhseive Dash Mounting Pad for Tom Tom Garmin Magellan GPS Suction Cup Mount Also for Dash Phone Holder – 2 Pack
- Smooth Surface Mount Disc – To provide smooth, glass-like surface for pedestals of suction cup car mounts to work more effectively. Suitable for Every Suction Mount
- Strong Sticky 3M PE Foam Pad – 3M Adhesive Tape sticks to almost all textured surfaces. *Make sure the surface is cleaned throughly and free of any dashboard conditioners or other treatments.
- Universal Compatibility – Semi-permanent Adhesive Mounting Disc works with all Garmin TomTom Magellean GPS suction mounting pedestals, and dashboard suciton phone mount.
- Size: about 70 mm in diameter
- Note: Each pad is one-time use only. Once removed, it may not be reusable.
About 70mm diameter fits for almost all Garmin TomTom Magellean GPS mounting pedestals and dashboard suction phone mount.
Dashboard Mounting Instructions
1. Choose a suitable location for disk (and pedestal) installation.
Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road or hinder vehicle operation.
2. Clean the dashboard surface area thoroughly with alcohol pad to ensure dashboard is clean and free of any dashboard conditioners or other treatments.
3. Remove the paper backing of the disk and place on the cleaned surface. Press the top of the disk down firmly to allow the adhesive to stick to the surface. Allow 24 hours for the adhesive to cure to the surface before applying any pressure.
4. Place the suction cup of the pedestal (sold separately) firmly down on the center of the mounting disk and lower the securing lever.
1. Prepare the surface around the disk by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the adhesive area for about a minute.
2. Take a long piece of dental floss in each hand and slowly work back and forth at the base of the adhesive disk. Gently use the dental floss to cut the adhesive from the dashboard until the black plastic disk is removed.
3. If the sticky adhesive area breaks apart or does not come off completely, re-apply a small amount of alcohol (or adhesive removal liquid) and carefully lift off the remaining area by hand.
Note: Adhesive disk is intended for semi-permanent installation and one-time application. Once removed, it can’t be reapplied.
2 * 70mm Adhesive Mounting Disk
6. ARKON APVHB20 90mm Extra Strength Adhesive Mounting Disk for Car Dashboards
The APVHB20 90mm adhesive mounting disk features an extra-strength 3M VHB adhesive and allows you to securely mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard. Applicable Arkon mounting pedestal models include CM017-KST-2SH, CM078WD-SBH, RM080AMPS, RM0792TWD, and RM0802T. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the extra-strength adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M VHB dash mount disc, then place and press down on a previously cleaned surface. (Allow 24 hours for the adhesive to cure before securing the base of the mounting pedestal to the center of the disk for best results.) WARNING: Use caution and discretion when adhering APVHB20 to your car dashboard or other flat surface. This disk uses 3M VHB adhesive, which is designed to be a PERMANENT solution. Use of this disk may result in permanent adherence to the selected surface. Professional strength solvents or tools may be helpful in removing the adhesive. Arkon is not responsible for any damage caused to your vehicle or other surface due to the installation of this mounting disk. Adhesive disks with a semi-permanent bonding strength (Model AP036 -70mm, Model AP013 -80mm, Model AP020 -90mm) are available from Arkon. For an extra-strength 80mm disk to use with 70mm suction mounts, see Arkon Model APVHB13.
7. Magnetic Mount, WizGear Universal Stick On (2 Pack) Dashboard Magnetic Car Mount Holder, for Cell Phones and Mini Tablets with Fast Swift-snap Technology, Magnetic Cell Phone Mount
- COMPLEMENTARY WIZGEAR DESIGN: The complementary design of the magnetic mount is one that fits into the back of any smartphone. The magnetic mount is has a smooth surface that is perfectly suitable for mounting and holding any smartphone in place.VERY EASY TO USE: This Stick On universal smartphone magnetic car mount holder
- POWERFUL MAGNETIC MOUNT: The reinforced magnetic holder of this mount is what sets it apart from other mounts. This Universal magnetic holder produces an intensive force of attraction that will hold any smartphone. Including Android, Apple, Blackberry and Microsoft devices.
- SWIVELS YOUR DISPLAY: Rotate your smartphone and swivel your display as you please. The base of the mount remains stick on you dashboard of your car and does not move, no matter how much swiveling or rotation you do. This guarantees that your smartphone will always remain in your preferred position.
- WIZGEAR STURDY BASE: The high quality rubber construction of the base of the mount is unique and very functional as well. It guarantees that the base of the mount will solidly hold the magnetic head of the mount, to help keep your smartphone in place, regardless of road vibrations or impacts
- WILL NOT BLOCK THE AIR VENT: and the windshield of the car. Its 10 times easier to use than any other mounts just stick it on your car and you are good to go.
WizGear Universal Stick On Magnetic Car Mount Holder Black, 2 Pack
Setting up your phone on a mount in your car has never been easier! WizGear Air Vent Car Mount for Smartphones saves you the hassle of placing your smartphone securely to make sure it doesn’t fall, just stick it on your car dashboard! The WizGear Air Vent Mount features a magnetic technology, which means your smartphone will be secure and have no chance of falling. When a phone is secure in place, it becomes easier to use for GPS navigation too.
1) This magnetic car mount for cell phones is not bulky or space consuming at all. You no longer have to suffice for keeping your phone in the cup holder or dashboard, because a normal car mount gets in the way. This magnetic car mount sticks on a dashboard, thereby not blocking your windshield or Air Vent.
2) Navigation is extremely easy with this magnetic car mount. It can easily rotate, fix, or tilt to any angle that best assists the viewer of the phone.
3)The magnetic technology is safe to use, and will not harm any smartphone. The carbon steel plates inside the magnetic car mount are ultra thin and designed in a way that it provides powerful holding power as well as absorbing magnetic instability. Along with being safe, it is also powerful, it attracts any phone to it quickly – this is the swift snap feature. The user can just bring the phone near the mount and it will take it easy, so the user no longer has to fuss about safe keeping their phone
Instructions how to set up the Mount
1)First clean up the surface on the mounting place.
2)Peel off the sticker from the mount and stick it on.
3)Place the magnet metal plate in your case between the cover and the phone, Or stick on the round magnet metal on your phone or GPS
3) And your phone is good to go!
8. AUKEY Car Phone Mount 360 Degree Rotation Dashboard Magnetic Cell Phone Holder for Car Compatible with iPhone 11 Pro Max / 11 / XS Max / XS / 8 / 7 , Samsung Galaxy S10+, Google Pixel 3 XL, and More
- Best Viewing:The base is able to rotate through 360 degrees, and the adjustable arm and ball joint makes it easy to find the ideal phone viewing angle
- Reliable Adhesion: Fixes securely to a flat surface on your dashboard. Features an additional sticker base for slightly curved or uneven surfaces
- Magnetic Attachment: Four powerful magnets securely hold your phone or GPS on your car dashboard. Just grab and go when you reach your destination. Note that wireless charging will not work when a magnetic plate is attached to your device or placed inside its case
- Easy Setup: Included circular metal plate (for smaller phones) and rectangular metal plate (for larger phones) easily slip between your phone and case or can be safely adhered to the back of your phone
- Package Contents: AUKEY HD-C49 Car Magnetic Phone Mount, Sticker Base, Circular Metal Plate, Rectangular Metal Plate, User Manual
9. iOttie Auto Sense Automatic Clamping Qi Wireless Charging Dashboard Car Phone Mount, Car Charger || for iPhone, Samsung Galaxy, Huawei, LG, Smartphones
- Auto sense: motion sensing technology automatically opens and closes mount for secure Phone Installation
- Qi certified: Qi certified wireless technology charges phone without need for charging cables
- Adjustable viewing: The newly crafted designed telescopic arm extends from 4.9” – 8.3” and pivots on 225° arc for a variety of optimal positions
- Strong SUCTION: One time use dashboard disc and reusable suction cup combo offers superior stick strength
- Hassle free warranty: iOttie Inc. Offers manufacturers guarantee on all products
The Auto sense is an advanced automatic wireless charging Car mount designed to maximize convenience and power on the road. Mount smartphones easily with the Auto sense feature that is powered by a proximity sensor and Servo motor. To mount your device, Simply place the phone near the mount’s sensor, and the arms will automatically close to Secure the device. Once mounted in the sturdy cradle, Qi wireless charging technology delivers power to the smartphone automatically without the need for additional charging cables. Release and retrieve smartphones easily by simply tapping the release buttons on the side, and the arms will open automatically. The auto sense phone mount is easy to set up and adjust with a strong suction cup that installs on your dashboard or windshield for added versatility. Experience a safer and more convenient driving experience with the Auto sense mount from iOttie.
10. Nite Ize Steelie Orbiter Dash Kit – Low Profile Magnetic Car Dash Mount for Smartphones
The Steelie Orbiter Dash Mount Kit keeps your phone conveniently accessible on the dash while letting you easily adjust your screen for the perfect viewing angle. This kit combines a Dash Mount with the powerful Orbiter Magnetic Socket and a low-profile metal plate that easily attaches to your phone or case. Our Dash Mount adheres on any vehicle dash with strong, removable 3M® VHB® adhesive for a secure hold. The Orbiter Magnetic Socket attaches to the Dash Mount using a powerful neodymium magnet and silicone center for a secure connection and smooth glide. By combining magnetic power and a thin high-friction ring designed to prevent slipping, the phone docking surface of the Orbiter Magnetic Socket holds your phone securely in place. Once the Dash Mount and Orbiter Magnetic Socket are affixed to your vehicle dash, simply adhere the low-profile metal plate to your phone or case and you’re ready to quickly attach, detach, and rotate your phone for the perfect viewing angle.
Steelie neodymium magnets are safe for use with mobile devices, but should be kept away from magnetically sensitive objects like credit cards, pacemakers or computer hard drives.
Nite Ize has been creating innovative, solution-based products with quality, performance and value at the core for over 25 years. Based in Boulder, Colorado, we aim to continue offering imaginative and innovative products that make our customers’ lives easier, safer and more fun.
By our suggestions above, we hope that you can found Disc For Dash Mount for you.Please don’t forget to share your experience by comment in this post. Thank you!