Nowadays, there are so many products of heat sink cooling in the market and you are wondering to choose a best one.You have searched for heat sink cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heat sink cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
827 reviews analysed
1. Intel Fan Heatsink Assembly Air 1151 Cooling BXTS15A
Intel Fan Heatsink Assembly, Air Cooling, Supports the LGA115x Sockets, NOT Designed for Overclocking
2. Easycargo 100pcs Heatsink Kit Small Cooler Heat Sink Set for Cooling Development Board Laptop CPU GPU VGA RAM VRAM VRM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator
- Update Version: 100pcs (18+82) small to medium sizes of heat sink.
- Small anodized Aluminium: 20pcs 9x9x5mm, 8pcs 10x10x10mm, 8pcs 11x11x5mm (L*W*H)
- Medium anodized Aluminium: 8pcs 14x14x7mm, 8pcs 19x19x5mm, 8pcs 20x20x6mm, 2pcs 22x22x10mm (L*W*H)
- Silver Tone Aluminium: 20pcs 7x7x6mm, 10pcs 8.5×8.5x8mm, 8pcs 15x15x6.5mm (L*W*H)
This set of cooler heat sink includes 10 different small to medium range sizes of heatsinks. It is totally composed of 100pcs of heatsinks including: Small anodized Aluminium: 20pcs 9mmx9mmx5mm, 8pcs 10mmx10mmx10mm, 8pcs 11mmx11mmx5mm; Medium anodized Aluminium: 8pcs 14mmx14mmx7mm, 8pcs 19mmx19mmx5mm, 8pcs 20mmx20mmx6mm, 2pcs 22mmx22mmx10mm, Silver Tone Aluminium: 20pcs 7mmx7mmx6mm, 10pcs 8.5mmx8.5mmx8mm, 8pcs 15mmx15mmx6.5mm (L*W*H). Can be used for cooling of variety of electrical components such as Development Boards VRAM VRM CPU GPU VGA RAM IC Chips LED Laptop MOSFET Transistor SCR Southbridge Northbridge Voltage Regulators.
3. Enokay Raspberry Pi 4 Model B Heat Sink Single Cooling Fan RAM Heatsink Set
The Raspberry Pi 4B Single Cooling Fan Was Included the Thermal Conductive Adhesive.
1.Fan Designed for Raspberry Pi 4B
2.Not included Raspberry Pi 4 Model B Motherboard
3.The Raspberry Pi 4B Single Cooling Fan Was Included the Thermal Conductive Adhesive.
1.Raspberry pi 4B Single Cooling Fan
2.Black Aluminum Heatsink Set for Raspberry Pi 4B
4. ELUTENG M.2 2280 Heatsink, Double-Sided Heat Sink Alloy Aluminum NGFF NVME Cooling Sink with 4 Thermal Conductivity Silicone Pads M.2 SSD Cooler Set for 2280 M.2 SSD
- Both SSD Heatsinks are available for the M.2 2280 SSD. Including a screw fixing heat sink, rubber band fixing heat sink, screws, rubber ring and thermal silicone pad. Compatible with Samsung 850 EVO SSD and more.
- 【Double-Sided Quick Cooling】 Groove design M.2 2280 heatsink, greatly increase the heat dissipation area, with 10°C – 25°C cooling effect (Varies depending on the environments), cooling the M.2 SSD to a safe temperature quickly and improving the performance of your computer.
- 【Phase Change Thermal Conductivity Technology】 The use of high-coefficient phase change thermal silicon wafers greatly improves thermal conductivity. Long-term use of phase change materials, thermal conductivity will be better.
- 【Durable Material】 Alloy aluminum oxidation greatly improves the corrosion resistance, hardness, wear resistance, insulation, heat resistance of the NGFF NVME cooler, and prolongs the service life.
- 【Easy to install】 Make precise and close fitting, easy to install, and not damage the hard disk.
5. LANDZO Raspberry Pi 3 B+ Dual Fan with Heatsink … (for 3B+)
Raspberry Pi 3 B+ Dual Fan with Heatsink
6. Easycargo 20pcs Raspberry Pi Heatsink Kit Aluminum + Copper + 3M 8810 Thermal Conductive Adhesive Tape for Cooling Cooler Raspberry Pi 4, Raspberry Pi 3 B+
- Suitable for Raspberry Pi 4 B, 3 B+, 3, 2, A, B, B+ boards
- Includes 15 pcs black anodized aluminum + 5 pcs copper heatsink
- Thermal conductive adhesive tape backing
- Can be applied with other devices for cooling VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge , Northbridge etc
- Raspberry pi not included.
Includes 15 pieces anodized black aluminum+ 5 pieces copper cooling heat sink set for Raspberry Pi models A, B, B+, 2, 3 , 3 B+ and 4 boards. These pure aluminum (15 pcs) and copper (5 pcs) heatsink include heat conductive adhesive tape for optimum heat transfer. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. These heat sinks kit can be applied in other devices to cool processor, regulators, VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge, Northbridge etc. Package includes: 5 pcs aluminum large heat sink: 0.56 x 0.56 x 0.27 inch (14mm x 14mm x 7mm) (L*W*H); 5 pcs aluminum small heat sink: 0.35 x 0.35 x 0.19 inch (8.8mm x 8.8mm x 5mm) (L*W*H); 5 pcs aluminum heat sink 0.56 x 0.39 x 0.27 inch(14mm x 10mm x 7mm); 5 pcs copper large heat sink: 0.59 x 0.59 x 0.02 inch (15mm x 15mm x 0.5mm) (L*W*H)
7. 4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement
- ❃❃ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ❃❃ Size: 40*40*10mm / 1.57*1.57*0.39in
- Speed: 6000RPM
- Noise: 27dBA
- DC12 / 24V
- Working Current: 0.06A / 0.08A
- Air Flow: 5.75±10% CFM
- Power: 0.96W
- Cable length: Approx 28cm / 11in.
- ❃❃ Cable connector is already fitted and product is out-of-the-box ready for installation.
- ❃❃ Great replacement item for your all metal hotends or maybe a small cooling fan for your 3D printer nozzle setup.
- ❃❃ Package Including: 4 * 3D Printing Fan. Note: If you meet the fans did not work, you can swap the red and black wires in the plug got it to work. (Any questions, you can contact us and we will give you a satisfied solution!).
This helps to prevent the heat from the nozzle traveling too far upwards.
Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality.
This is a DC 12V 0.08A cooling fan.
Dimensions are 40mm x 40mm x 10 mm.
Sufficient for use in 3D printing, operating speed is 6000 RPM.
Equipped to properly cool your 3D printer’s extruder assembly, this extruder fan is compatible with the MakerBot Replicator 2 and MakerBot Replicator 2X.
Also compatible with Flashforge, CTC, and other 3D printer types.
Rated Voltage: DC 12V
Consuming Current: 0.08A
Speed: 6000 + -10% RPM
Air Flow: 6.5 CFM
Static Pressure: 2.9
Noise Level: 27dBA
Note: Any questions, you can contact us and we will give you a satisfied solution!
Please check the fan plug, maybe the plug was wired opposite of the fan it was replacing, that is reverse polarity.
8. Pure Copper Water Cooling Block 40x40mm for Liquid Water Cooler Heat Sink System Silver for CPU Graphics Radiator Heatsink (1 Pack)
- √Processing: Pure copper
- √Internal flow channel extrusion forming,brazing parts into a whole
- √Internal fin thickness 0.5MM，Leak rate of less than 5X10-6 mbar.l/s parts
- √Surface treatment: double side processing were smooth
- √Applicable to computer CPU water, industrial inverter driver, laser head cooling, industrial control cabinet cooling
-Size:40 (D) x 40 (W) x 12 (H) MM -Weight:35g
1 x Pure copper CPU Water cooling
9. Gadgeter 10pcs Aluminum Heatsink Cooler Circuit Board Cooling Fin For Raspberry Pi,VGA RAM,IC Chips,Mosfet SCR , With 3M 8810 Heat transfer Peel and Stick Tape
10x Aluminum Heat Sinks
10x Thermally Conductive Heat Transfer pads (All Pad Are Not Pre Assembled .Assembly Required)
1 x Gift Cable Ties(charging cable does no include) every unit will receive one extra bonus if you don’t received please contact us we will send you the gift.
If for any reason you are unhappy with any product by GADGETER, please do not hesitate to contact us. We take full ownership and responsibility for the quality of our products and will do our very best to solve your problem quickly and efficiently!
10. Jun-Electron for Raspberry Pi 4 Model B Case, Dual Cooling Fan, Enclosure Aluminum Alloy Case with Heatsink Pillar
- Perfectly compatible with Raspberry Pi 4B ,Access to all ports for Pi 4. Not for Pi 3B+
- Passive Cooling Case with Heat Dissipation Design, Built-in three Heatsink Pillars to tightly touch with on-board raspberry pi 4 chipset. No More Overheating Problem
- Quiet dual fan without noise and great cooling performance, it can drop temp up to 30-37 degree
- Smooth and straight aluminum material, Ultra-thin design & Easy to install
- Strong metal case can protect your raspberry pi 4 from scratched, dust, damaged. High quality product and service Guaranteed
By our suggestions above, we hope that you can found Heat Sink Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!