563 reviews analysed
1. 15ft MicroUSB & MiniUSB Dash Cam Hardwire Kit with Mini/LP Mini/ATO/Micro2 Fuse, Micro to Mini (and Type-C) Port Adapters and Battery Drain Protection System
- ONE FITS FOR ALL: With Micro to Mini (left angled) and Micro to Type C port converters, the kit is basically fit for ALL Dash Cams or Car Charger like NuCam DL, Wireless Charger Phone Holder Nucharger Auto, Rexing, ROAV, Anker, DDPai, Papago etc. Also, it comes with most popular fuse types including Low-Profile Mini, Mini, ATO(Regular), and Micro2. It has left angled mini USB head. For right angled mini USB head, please search B0787LD92N.
- ENOUGH LENGTH: Overall 15ft hardwire kit can be installed basically on All vehicles. Input length: 3ft, Output length: 12ft.
- BATTERY DRAIN PROTECTION SYSTEM: Device powers off when vehicle battery voltage drops below 11.6V for protection purpose to save battery to start your engine. When car batteries are new, they’re around 12.5 Volts or more. It’s also suitable for 24V systems.It is recommended to turn on parking mode for your dash cam to save your battery power. Contact us for higher cutoff voltage model if your battery is drained too low to start your engine.
- EASY INSTALLATION: Installation is easy and clean without any help from professionals! However, our customer service is also immediately responsive if you do have questions.
- WARRANTY: One year free service for any question you are facing with this dash cam hardwire kit.
2. AUKEY Dash Cam Hardwire Kit with Motion Detection Sensor, Dashboard Camera Hardwire Kit for DR01, DR02, DRA1, DR02 J, DR03 & DR02 D Dual Dash Cameras, and More
- Dash Cam Upgrade: Maintain automatic monitoring of your vehicle when it’s parked and the ignition is off. Don’t leave your car unprotected
- 360° Protection: The inline sensor detects motion within 2–3m / 6.56–9.84ft in all directions. It instantly triggers the dash camera to capture any activity, and the dash camera automatically stops recording and stands by after 2–3 minutes if no further motion is detected
- Simple Setup: No electrical wiring or tools needed to install this kit. Plugs into the OBD-II DLC port under the dash (in all cars sold within the U.S. since 1996)
- Parking Mode Compatibility: Works with AUKEY DR01, DR02, DR02 D, DR02 J, DRA1 and many other mini-B dash cameras with parking mode (motion detection recording)
- Package Contents: AUKEY PM-YY Dashboard Camera Hardwire Kit, User Manual, 45-Day Money Back Guarantee and 24-Month Product Replacement Warranty Card
Dash Cam Companion
Investing in a dash camera is a smart choice for personal protection and insurance purposes, but most dash cameras power off when the car ignition is switched off, leaving your car unprotected. The AUKEY PM-YY Dashboard Camera Hardwire Kit maintains power supply to your dash camera, solving this problem.
Constant Car Protection
The PM-YY connects your dash camera to your car’s battery so the camera can receive power and record any activity after the ignition is turned off. To minimize battery draw in parking mode (motion detection recording), the inline motion detection sensor only activates the camera if motion is detected (within 2–3m / 6.56–9.84ft), and the camera enters standby again after 2–3 minutes if no further motion is detected. The hardwire kit’s 11.6V cutoff also prevents excessive discharge.
Simply plug the connectors of this cable into the OBD-II DLC port of your car’s fuse box and the mini-B port on your camera. Use the 3M adhesive pad to fasten the motion detection sensor to your car’s windshield in seconds. No fuss with fuses or wiring.
Discreet Cable Management
The 10-foot hardwiring cable fits neatly and almost unnoticed in your car, elevating your dash camera to the next level with greater integration and functionality. Also, with a car charger port freed up, you have more ports to charge your devices. This hardwire kit is a small but powerful dash camera accessory for your AUKEY DR01, DR02, DR02 D, DR02 J, and many other dash cameras with mini-B power input port and parking mode.
45-Day Money Back & 24-Month Warranty
All AUKEY products are backed by our 45-Day Money Back Guarantee and 24-Month Product Replacement Warranty.
3. SHISHUO Dash Cam Hardwire Kit – Mini USB and Micro USB Port 3.5m Cable with LP Mini/Mini/ATO/Micro2 Fuse, 12V to 24V Input, 5V Output for Dash Cam GPS Sat-Nav with Battery Drain Protection
- 3.5m hardwire kit for dash cam or other device powered by Mini USB port and Micro USB port, 5V/1.5A steady output, voltage input supports from 12V-24V
- Comes with Low-Profile Mini, Mini, ATO (Regular), and Micro2 fuse adapter, suitable for most cars. Leads come with protective sleeve to cover the crimps
- Make parking monitor for dash cams (should the device support) available, keeps it powered even after engine off
- Battery drain protection will cut off the power once the input voltage drops to under 11.6V (23.2V for 24V input), leaving enough power to ignite the engine
- 2-year warranty from SHISHUO. Worry free aftersales customer services.
SHISHUO Dash Cam Hardwire Kit – Keep your dash cam powered even after engine off!
Dash cam product’s parking monitor function will require device been hardwired to car battery, that’s the best reason why you’ll need this hardwire kit!
This hardwire kit comes with 3.5m hardwire cable with Mini USB port and adapter cable to convert to Micro USB port, providing steady 5V/1.5A output. Big voltage input ranging from 12V-24V.
4 fuse adapter available, Low-Profile Mini, Mini, ATO (Regular), and Micro2, suitable for most cars. Each lead has a protective sleeve to cover the crimp, safer and more durable.
Featured with battery drain protection, power will be cut off once the input voltage drops to under 11.6V (23.2V for 24V input), ensure there’s enough power left to ignite the engine.
1* Hardwire cable with Mini USB port
1* Mini USB to Micro USB adapter cable
4* Different types fuse lead
4* Different types fuse adapter
1* Crowbar 15* Cable clips
4. Vantrue 10ft Mini USB 12V-24V to 5V Dash Cam Hardwire Kit with Mini/ACS/ATO/Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for Mini USB Dash Cams, GPS Navigator, Radar Detectors
- 【Compatible 12 – 24V Vehicles】This hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 – 24V.
- 【24/7 Parking Surveillance】Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.
- 【Power Supply】Directly to the ignition wire for power only so it can turn on and off with the ignition and you don’t have to worry about plugging in the charger, or turning the dashcam on, or any such stuff.
- 【Low voltage protection】It has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.4V or 22.8V, thus preventing it draining the battery.
- 【Mulitiple uses】Mini USB plug compatible with all mini usb dash cams such as Vantrue N2 Pro/N2/X3/T2/N1 Pro/X1, GPS navigator and radar detector etc, it always frees up the cigarette lighter for other devices.
5. Meknic SV-PC01 Dash Cam Hardwire Kit with Battery Drain Protection System,2A Dash Cam Hardwire Fuse Kit For Car DVR Camera Or GPS Power Supply-Installation Manual Include (Mini USB)
- ✅ Meknic Dash Cam Hardwire Fuse Kit for car DVR recorder that Use Right Elbow Angle Mini USB,24 Hour Surveillance and Protects Against Battery Dying
- ✅ No need for cable from car cigarette lighter socket, replace it with a permanent hidden cable Installation in minutes with little to no expertise required. Simply piggy backs from car fuse box socket for Meknic Car Dash Cam Hardwire Fuse Kit
- ✅ Meknic Hardwiring Kit Use a Fuse Tap or Wire Tap to Draw Power From Fuse Block Or Wire, No damage to the original circuit of the car
- ✅ Meknic Cam Hardwire kit With low voltage protection function, protect car’s battery, 12V-11.2V(Cut Off Automatically) 24V-23.2V(Cut Off Automatically) to stop your car DVR working automatically
- ✅ Warranty: The company offers one year warranty and 100% satisfaction guarantee and 30-day, hassle-free return policy for Meknic Car Dash Cam Hardwire Fuse Kit.
6. Dash Cam Hardwire Kit, Micro USB & Mini USB Hard Wire Kit Fuse for Dashcam, Dash Camera Charger Power Cord, （13ft）
- ★【Wide Compatibility】This hardwire kit is suitable for most car models(Voltage between 12-24V). Our hardwire kit Equipped Mini USB and Micro USB ports,works for almost all car mini USB & Micro USB ports device, such as dash cam、mirror cam、GPS navigator and radar detector etc(Not fits for Garmin device)
- ★【24 Hours Surveillance 】 The vehicle hard-wire kit connected to car battery or fuse box power, can uninterruptedly supply power for dash camera for 24 hours. It can even supply power when the car is turned off.If the voltage of your car battery drops to 11.6V or 23.2V, the regulator will cut off the power,which leaves you with enough power to start your car
- ★【High Secure Standards】Input: 12v – 24v, Output: 5v 2A /Build in Dynamic IC Charge IC & Magnetic ferrite to prevent Electro-Magnetic shock,Low Voltage and Overcharge Protection, Overall 13ft hardwire kit can be installed basically on All vehicles. Input length: 3ft, Output length: 10ft.
- ★ 【 Package Contents 】Dashboard Camera Hardwire Kit ( mini USB & Micro USB ports) ,Fuse Tap Cable x4 , Installing crowbar x1 ,User Manual,
- ★ 【WARRANTY】45-Day Money Back Guarantee and 24-Month Product Replacement Warranty ， Strict production management mode and high quality material let us to make the warranty
7. Dash Camera Hard Wire Kit With Micro USB Direct Hardwire Car Charger Cable Kit For HD PRO & Micro USB Dashboard Camera Power Supply Car Charger GPS Car DVR Power Box(Right Angle Micro USB Fuse Kit)
- 10 Foot Hardwire Kit for Dash Cameras and other Devices that Use Right Angel Micro USB
- Perfect for parking surveillance, freeing up outlets in your vehicle
- Protects against battery dying, Get 24 hours of battery life
- Easy installation: use a fuse tap or wire tap to draw power from fuse block or wire
- Wide voltage input: 12~35V Low-voltage protection threshold about 12V Car <
- 11.6V. When 24V, Car <
- 23.2V Output voltage: DC 5V
1.It compatible with any vehicle DVR with Micro USB socket.
2.Perfect for parking surveillance
3.Keeps your car organized (Connects your dash cam to the car battery)
4.Works with the best dash cams on the market
5.Get 24 hours of battery life
6.Protects your car battery from dying
7.Less static when you’re listening to the radio Charge your phone at the same time (keeps your 12V outlet free)
8.Doesn’t permanently alter your car in any way Easily installs in any modern car
9.Works with a number of portable electronics
1.Wide voltage input: 12~35V Low-voltage protection threshold about 12V Car <11.6v. when="" 24v,="" car="">< 23.2v="" output="" voltage:="" dc="">
2.Wireless Remote: No
3.Batteries Included? No
4.Batteries Required? No
1.Dash Cam Hardwire Kit – MIicro USB
2.10 Amp ATM Mini Blade Fuse Add-A-Circuit Fuse Holder
8. VIKEWE Upgraded Dash Cam Hardwire Kit with Mini/Micro USB Port, Battery Drain Protection, Anti-Interfere Magnetic Ring, 12V-24V to 5V Car Dash Camera Charger Power Cord, 5 Fuse Type & Crowbar/Cable
- ❖【Wide Compatibility & 2 Types Port】Our dash cam hardwire kit directly connects the dash camera, GPS navigator or radar detector etc to the car, bus, SUV and most car models. With 2 types port, suitable for different needs at different dash cams and car charger
- ❖【Built-in Smart Device】This hardwire kit with over-heat, over-current and low voltage protection function, it can protect your car’s battery when vehicle battery voltage was drops to 11.6V (12V input) or 23.2V (24V input), the control box will cut off the power, which leaves you with enough power to ignite the engine, and will not damage the battery
- ❖【24 Hours Surveillance】The upgrade hardwire kit connects to car battery or fuse box power, can uninterruptedly supply power for device 7*24. It can keep powered on even car turned off
- ❖【Easy Installation】No need to occupy the car cigarette lighter, just have the vehicle hardwire kit connected to car battery or fuse box power port, route the wire to the device position. Within minutes, you could finish the installation with little or no expertise required ( Installing Crowbar / Cable clips x 15 include）
- ❖【Perfect Parameter】With about 11.5ft (3.5 m) length of Cable / mini USB & micro USB port. Input voltage: 12V-24V Output: 5V/2A (Anti-Interfere Magnetic Ring included – Avoid your car radio will be interfered )
VIKEWE Dash Cam Hardwire Kit – Make Connection Easier
It’s a must-have if you’re using a dash camera, GPS navigator or radar detector in your car or truck etc vehicle. The hardwire kit connects to car battery or fuse box power, can uninterruptedly supply power for device 7*24.
1. Wide Compatibility: This dash cam hardwire kit is perfect for most type of devices and suitable for most vehicle models.
2. Low Voltage Protection: When voltage lower than 11.6 V (12V input) or 23.5 V (24V input), hardwire kit automatically cut off the power. Leaves you with enough power to start your car, and will not damage the battery
3. 24 Hours Surveillance: Our kit can uninterruptedly supply power for device 7*24. Meanwhile, no need to occupy the car cigarette lighter
4. Easy Installation: Just have the vehicle hardwire kit connected to car battery or fuse box power port.
Connector: Mini USB and Micro USB Port (with adapter)
Cable Length: 11.5ft (3.5m)
Hardwire Kit for Dash Cam x1
Mini USB to Micro USB Adapter x 1
Fuse + Fuse Adapter x 5 sets
Anti-Interfere Magnetic Ring x 1
Installing Crowbar x 1
Cable clips x 15
9. Extractme Dash Cam Hardwire Kit, Micro USB Port/Mini USB Port, 8.5V-28V to 5V 2A Vehicle Hard Wires Kit Fuse for Dash Cam Cameras, Low Voltage Protection (10.5FT)
- ????【Dash Cam Hardwire Kit】DC 8.5V-28V. Output: 5V, 2A, for Mini-USB port or Micro USB port dash cam camera, Cable length: 10.5ft. Time Lapse records footage at a lower frame rate while reducing video size, to cover a longer period of surveillance.
- ????【24 Hours Surveillance】Extractme dash cam hardwire fuse kit connect to car battery or fuse box power can realize uninterrupted power supply for dash camera for 24 hours. Note: If you don’t need this function, please use YELLOW wire connect to ACC, RED don’t connect.
- ????【Low Voltage Protection】The hardwire installation kit power will be disconnected automatically when the voltage reaches below 11.6V, thus preventing it draining the battery, to make sure you have enough power to start the car.
- ????【Anti-Interference】Transform vehicles 12V/24V to 5V. And with anti-interference design, greatly reduce the vehicle hard-wires kit to the radio signal interference.
- ????【Wide Compatibility & Save Space】No longer requires connection to the car cigarette lighter socket, save space and make your car looks clean. This smart hardwire kit accepts voltage runs on 12-24V, works perfect for Car, Truck, Bus, Suvs.
Dash Cam Hardwire Kit, Extractme 10.5FT Mini USB Hard Wire Kit Fuse for Car Dash Camera, 8.5V-28V to 5V 2A Hardwire Dash Cam Kit with Battery Protection
1. Find Your Car Correct Fuse Slot
Please check your car’s manual and confirm your car fuse box location and open it.
2. Connect the Red Wire
Connect red wire to ACC(connect to on/off ignition switched fuse).
3. Connect the Yellow Wire
Connect yellow wire to always powered constant fuse.
4. Connect the Black Wire
Attach the ground cable to the bolt near the fuse box.
Whether your devices’ voltage is 12V or 24V, it will actomatically change to 5V 2A;
If you don’t have experience to install this hardwire kit by yourself, please ask for the professional.
Dash Cam Hardwire Kit Specifications:
> Input voltage : 8.5-28V input
> Output voltage: DC5V
> Output current: 2A
> Working Temperature: -22°F to 167°F (-30°C to 75°C)
> Product length: 10.5FT; product weight: 136g
> It compatible with any vehicle car DVR with Mini USB/ Micro socket for any dash cams
> Perfect for 24H parking surveillance
> Keeps your car organized (Connects your dash cam to the car battery)
> Protects your car battery from dying
> With low voltage protection function, protect car’s battery, lower than 11.6V(cut off automatically)
1 * Car Dash Camera Hardwire Kit
1 * Mini USB to Micro USB Cable
10. Dash Cam Hardwire Kit, SSONTONG 11.8ft Mini USB and Micro USB Hard Wire 12V to 5V Low Voltage Protection Fuse Car Charging Cable for Dash Camera, Car DVR, GPS Navigator, Radar Detectors and More
- ★New Upgrade in 2019: Equipped with a Mini USB and Micro USB port, the stable and safe power output provides power for all Mini USB and Micro USB devices such as car driving recorders, GPS Navigator, Radar Detectors and mobile phones.
- ★High Security Standards: Built-in high-performance sensor chip, designed for 12V cars. It will automatically cut off the power when it senses below 11.6V. To ensure that your car has enough power to start.
- ★Two Working Modes with 4 Fuses: The dash cam hardwire kit with Mini, ACS, ATO, Micro2 add a circuit fuse holders, it can be used for 24-hour surveillance mode or for regular ACC mode. If your car is 24V, not a 12V car, please use ACC mode. Permanent connection, no need to occupy the car cigarette lighter.
- ★Easy to install: No professional help is required. We presented clips and crowbars to help you open the car insurance box. There is also a paper installation instructions.
- ★100% Satisfactory Service: We are committed to providing our customers with better products and services. If you have any questions, please feel free to contact us and you will get a satisfactory response within 24 hours.
By our suggestions above, we hope that you can found Micro Usb Dash Cam Hardwire Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!