626 reviews analysed
1. MGQFY 4 PCS 80mm (3.15") Circular Double Side Sticker Dashboard Adhesive Replacement Compatible with Xiaoyi Camera/Car Mount/Windshield Pad Mounting Disk for Suction Cup Car Phone Holder Bracket GPS
Feature
- What you get:4 PCS Super Strong Double Side Sticker for Car Phone Mount Holder Bracket, GPS, Camera ,Wall holder, Dashboard Toys, Windshield,Tiles, Wall Pictures and more.
- Strong Adhesive Pads Compatible with xiaoyi camera ,Use widely:Double Sided Clear Acrylic Adhesive Disk Round Tough Sticky Tape Compatible with Mpow 033 car mount holder , Windshield Long Arm Car Phone Mount and other Car Phone Mount Holder Bracket ,GPS Camera ,Decorations, Dashboard Toys, Windshield,Tiles, Wall Pictures.Replacement Adhesive Kit for Long Arm Universal Magnetic Cradle Windshield Dashboard Cell Phone Mount Holder etc.
- CUT INTO ANY SIZE YOU NEED:You can cut pads into smaller pieces if need.
- Strong Adhesive and not leave a residue：Strong adhesive is strong yet leaves no residue when removal is required.
- These sticky pad can stick to lots of materials, such as wood, metals, glass, papers, and plastics and fabrics, etc.
Description
Package include:4 pieces Double Side Sticker Pad.
Double Side Sticker for Suction Cups for Car Bracket Mount Holder /GPS/Camera/Wall hook/and more
2. Replacement Suction Cup Mount Part 17.2mm Ball Joint for Car Phone Mount, Car Phone Holder, Phone Holder for Car, Magnetic Phone Car Mount for Windshield/Window/Dash/Dashboard Mount
Feature
- 【UNIVERSAL COMPATIBILITY】The Car Phone Mount pedestal replacement is fully adjustable with all 17.2mm swivel ball mounting bracket.[NOTE: Mounting bracket not included]. It is a best accessory replace your broken or inoperative car mount.Perfect replacement for broken or ineffective parts of your original part and save your cost one the car phone mount.
- 【EXTENDABLE ARM】Simply twist the button to adjust arm width that ranges from 4.7in to 6.3in and pivot up or down(240 degree adjustable)for optimal viewing height. Prevent from blocking your view while driving.
- 【SECURE ATTACHMENT】With the Ultra Sticky Suction Cup Pad, the car phone mount can stick tightly on the dashboard windshield or most surfaces except leather, vinyl and soft surface with the sticky gel on the base of the suction cup .（please use the included 3M VHB dashboard pad if the surface you want to mount is not smooth but textured.).
- 【SIMPLE SETUP】Easily install by press and lock the cup onto the dashboard windshield or table desk while Remove easily by pulling the suction pad without leaving any nasty mark on your dash.(NOTE: please avoid to expose it to the sun in high temperature for a long time).
- 【WIDE APPLICATION】The Car Phone Holder can apply to windshield mounting/Landscape Orientation/Desk Mounting. With the excellent industrial work and the secure holding power of sticky suction cup pad, the phone holder is strong enough to hold tight to even the largest tablet or smart phone. Compatible iPhone mount, Samsung phone holder for Android, along with Google devices.
Description
Broad Compatibility
Compatible with all 17.2mm swivel ball mounting bracket.NOTE: Mounting bracket not included.
Perfect replacement for broken or ineffective parts of your original
Strong Sticky＆Reusable Suction Cup Mount
Quality suction cup along with sticky gel pad layer make sure the mount attach well to the dash or windshield and stay put even through the bumpy road.
Suction cup can be restored in mint condition by simply rinsing under warm water and air dry.
NOTE:
1.Compatible with 17.2mm Mounting Bracket (not included). If the swivel ball is not fit your bracket, please contact with us, we will provide you with full refund.
2.If the surface of your car s dashboard is not completely smooth, but textured, please use the 3M dashboard pad.The suction cup may not compatible with leather or vinyl dashboard. Recommend that to mount it on the windshield for stronger hold if your car’s dashboard surface is leather or vinyl.
3.Please avoid to expose it to the sun in high temperature for a long time in case reduce the using life of the suction cup.
If there is residue here, you can wipe it off with alcohol.
Package Contents:
1 x Suction Cup
1 x Sticky Gel Pad
1 x User Manual
Warranty
Our goal is to provide an exemplary level of customer service.
We provides LIFETIME warranty for a refund or replacement if any quality issue.
Feel free to contact us
3. Crossery Adhesive Mounting Disk for Car Dash Board | Phone Mount, Dashboard Cam & Smartphone Holder Suction Disc | Compatible with Garmin & Tom Tom GPS | Cell Phone & Car Accessories | 90mm 2-Pack
Feature
- ? FOR ALL SUCTION PEDESTALS – Transform your windshield mount into a dashboard console with our adhesive disk. It works with any 80mm suction cup for most smartphones as well as Garmin and TomTom GPS.
- ? FAST APPLICATION – No assembly or tools required. Simply clean the part of your dashboard where you want to install the disk. Then, peel off the paper backing, place the disk on the clean surface, and press down.
- ? UNINSTALL EASILY – All you need is rubbing alcohol or any adhesive removal product. Use a cotton swab to cover the entire adhesive. With a long piece of dental floss, cut through until the disk detaches.
- ? NO ADHESIVE RESIDUE – Upgrading to a bigger device? No worries! You can remove this mounting disk any time and it won’t leave a trace or damage your dashboard.
- ? STRONG & STICKS ANYWHERE – This car accessory is heat resistant and built with durable materials to last a long time. It will adhere to vertical surfaces, soft touch dashboards and windshields.
Description
Is your windshield-mounted device distracting you while driving?
In your busy lifestyle, staying connected is a must. You also make sure that it doesn’t risk your safety. So, you install pedestals in your car to hold your mobile phone, GPS and camera. They make it possible to keep your hands on the wheel while carrying on with business.
Unfortunately, most suctions are designed to attach to the windshield, which isn’t exactly the safest place to mount your devices. There’s the danger of falling off their holders. They may also block your view of the road at certain angles.
Convert your windshield mount to a dashboard console with Crossery Adhesive Mounting Disk!
This universal car accessory works well with any 80mm smartphone, car camera and GPS mounting pedestal. The suction cup adheres to the disk, which you stick to your dashboard. In this upright position, you eliminate the risk of your devices falling off of their cradles.
Still prefer your electronics mounted on the windshield? No Problem! Our adhesive disk comes in a much larger size than your suction cup to ensure a secure and sturdy fit that keeps your device holder stable.
No matter where you decide to place your gadgets, or how small your car is, our compact disk won’t take up too much space. Plus, the adhesive is highly resistant to heat, so there’s no danger of the disk accidentally detaching.
Here are more reasons to love our adhesive mounting disk:
? You have 80mm and 70mm options for smaller devices and mounting pedestals ? It comes in black to fit all car interiors
? The strong but gentle material won’t scratch your dashboard or windshield ? A practical gift for other busy friends and family
Keep your dashboard, windshield and gadgets protected. Add Crossery Adhesive Mounting Disk to your cart TODAY!
4. Dashboard Pad Mounting Disk for Suction Cup Phone Mount & for Tom Tom Garmin GPS Suction Mount Sat Nav Dash Cam Holder Stick On Universal Dash Mount Pad w/3M Adhesive 70mm Diameter 3 Pcs
Feature
- To provide smooth, glass-like surfaces for pedestals of suction cup car mounts to work more effectively.
- 3M PE foam adhesive at the bottom can be fixed on textured surfaces.
- Has a diameter of around 2.76 inches, applicable to most suction cup GPS/mobile holders on the market.
- No tools required for installation.
- Buy with confidence as every APPS2Car product comes with one-year warranty.
5. iOttie Easy One Touch 4 Dash & Windshield Car Mount Phone Holder || iPhone Xs Max R 8 Plus 7 Samsung Galaxy S10 E S9 S8 Plus Edge Note 9 & Other Smartphones
Feature
- EASY ONE TOUCH LOCK/RELEASE: Patented Easy One Touch mechanism allows quick one-hand open and close operation
- ADJUSTABLE VIEWING: The newly re-designed Telescopic Arm extends from 4” – 6. 5” and pivots on 225° arc for a variety of optimal positions
- UNIVERSAL MOUNTING: Holds all phone and case combinations from 2. 3″ – 3. 5″
- STRONG SUCTION: One time use dashboard disc and reusable suction cup combo offers superior stick strength
- BOTTOM FOOT: Foot on the bottom of Mount Cradle can be adjusted side-to-side, up and down, or removed to hold smartphones and cases of all sizes.
Description
The Easy One Touch 4 provides a compact, versatile, and highly functional mounting solution. It offers a redesigned telescopic arm which extends up to 5 inches to provide users with even more viewing angles. Also included is an adjustable bottom foot that not only moves left and right but also up and down. As always, the Easy One Touch 4 includes the powerful biotite sticky gel pad. The Easy One Touch 4 has one last exciting feature: new compatibility. Phones up to an impressive 3. 5 inches will fit safely into this mount. Mount Smart. Drive Smarter! *Please note: if you have Lexus or Toyota Vehicles from the years 2003-2011 we highly recommend mounting on your windshield (state law permitting). You may also consider our Easy One Touch 4 Air Vent or Easy One Touch 4 CD Slot Car Mounts as additional options. Dottie will not be liable for any indirect, incidental, or punitive damages arising from the use of any biotite product. The biotite Limited does not, in any situation, cover the repair or replacement of property, including but not limited to, electronic devices and/or other personal property.
6. Arkon 80mm Adhesive Mounting Disk for Car Dashboards GPS Smartphone Dashboard Disc
Description
The AP013 80mm adhesive mounting disk allows you to mount an Arkon or third-party 70mm windshield suction mounting pedestal to your car’s dashboard, including Arkon’s mounting pedestal models GN079WD-SBH, GN068WD-SBH, GN022-SBH, GN014-SBH, GN015-SBH, and GN042-SBH. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the disk adhesive to cure on the dashboard before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For a 90mm disk to use with 80mm suction mounts, see Arkon Model AP020.
7. Dashboard Mount Disc 70mm Diameter 3M Adhseive Dash Mounting Pad for Tom Tom Garmin Magellan GPS Suction Cup Mount Also for Dash Phone Holder – 2 Pack
Feature
- Smooth Surface Mount Disc – To provide smooth, glass-like surface for pedestals of suction cup car mounts to work more effectively. Suitable for Every Suction Mount
- Strong Sticky 3M PE Foam Pad – 3M Adhesive Tape sticks to almost all textured surfaces. *Make sure the surface is cleaned throughly and free of any dashboard conditioners or other treatments.
- Universal Compatibility – Semi-permanent Adhesive Mounting Disc works with all Garmin TomTom Magellean GPS suction mounting pedestals, and dashboard suciton phone mount.
- Size: about 70 mm in diameter
- Note: Each pad is one-time use only. Once removed, it may not be reusable.
Description
Universal Compatibility
About 70mm diameter fits for almost all Garmin TomTom Magellean GPS mounting pedestals and dashboard suction phone mount.
Dashboard Mounting Instructions
1. Choose a suitable location for disk (and pedestal) installation.
Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road or hinder vehicle operation.
2. Clean the dashboard surface area thoroughly with alcohol pad to ensure dashboard is clean and free of any dashboard conditioners or other treatments.
3. Remove the paper backing of the disk and place on the cleaned surface. Press the top of the disk down firmly to allow the adhesive to stick to the surface. Allow 24 hours for the adhesive to cure to the surface before applying any pressure.
4. Place the suction cup of the pedestal (sold separately) firmly down on the center of the mounting disk and lower the securing lever.
Removal Instructions
1. Prepare the surface around the disk by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the adhesive area for about a minute.
2. Take a long piece of dental floss in each hand and slowly work back and forth at the base of the adhesive disk. Gently use the dental floss to cut the adhesive from the dashboard until the black plastic disk is removed.
3. If the sticky adhesive area breaks apart or does not come off completely, re-apply a small amount of alcohol (or adhesive removal liquid) and carefully lift off the remaining area by hand.
Note: Adhesive disk is intended for semi-permanent installation and one-time application. Once removed, it can’t be reapplied.
Package
2 * 70mm Adhesive Mounting Disk
8. ARKON APVHB20 90mm Extra Strength Adhesive Mounting Disk for Car Dashboards
Description
The APVHB20 90mm adhesive mounting disk features an extra-strength 3M VHB adhesive and allows you to securely mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard. Applicable Arkon mounting pedestal models include CM017-KST-2SH, CM078WD-SBH, RM080AMPS, RM0792TWD, and RM0802T. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the extra-strength adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M VHB dash mount disc, then place and press down on a previously cleaned surface. (Allow 24 hours for the adhesive to cure before securing the base of the mounting pedestal to the center of the disk for best results.) WARNING: Use caution and discretion when adhering APVHB20 to your car dashboard or other flat surface. This disk uses 3M VHB adhesive, which is designed to be a PERMANENT solution. Use of this disk may result in permanent adherence to the selected surface. Professional strength solvents or tools may be helpful in removing the adhesive. Arkon is not responsible for any damage caused to your vehicle or other surface due to the installation of this mounting disk. Adhesive disks with a semi-permanent bonding strength (Model AP036 -70mm, Model AP013 -80mm, Model AP020 -90mm) are available from Arkon. For an extra-strength 80mm disk to use with 70mm suction mounts, see Arkon Model APVHB13.
9. 70mm Adhesive Mounting Disk for Car Dashboards Garmin TomTom GPS Dashboard Disc
Description
The AP036 70mm adhesive mounting disk allows you to mount an Arkon or third-party 60mm windshield suction mounting pedestal to your car’s dashboard, including mounting pedestals for Garmin and TomTom GPS devices. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Allow 24 hours for the adhesive to cure before securing the base of the mounting pedestal to the center of the disk for best results.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For an 80mm disk to use with 70mm suction mounts, see Arkon Model AP013. For a 90mm disk to use with 80mm suction mounts, see Arkon Model AP020.
10. Rovtop 3 Pieces Adhesive Mounting Disk for Car Dashboards Vehicles with Windshields (Medium)
Feature
- Come with 1pcs 105mm and 2pcs 75mm adhesive mounting disk
- Apply the adhesive side to the dash and the suction cup from your existing mount to the top side of the disc
- Adhesive is strong yet leaves no residue when removal is required
- Ideal for vehicles with windshields that may be hard to reach
Description
Package included:
1x 105mm Adhesive Mounting Disk;
2x 75mm Adhesive Mounting Disk
Warranty:
24-month warranty.
Note:
1.It is suggested to allow 24 hours for the adhesive to solidify before securing the base of the mount to the center of the disk
2.How to remove: Saturate the area with Medicinal alcohol or other adhesive removal product, then scrape the adhesive with a dental floss
Any questions you have, please feel free to contact us. We will get you back within 24 hours.
Conclusion
By our suggestions above, we hope that you can found Reusable Dash Mounting Disk for you.Please don’t forget to share your experience by comment in this post. Thank you!
